Table of Contents
Advertisement
Step 6: Push the button of the electrical entry and push it
as long until the cable is tensioned.
Step 7: Raise the load only a little way initially and check
that the cable and load are stable.
Step 8: Raise the load slowly and steadily upwards.
NOTE!
- Suspension hooks and load hooks becomes dis-
torted if overloaded; there is no brittle fracture.
Step 9: Open the safety device of the load hook and
take down the load.
9
Care, maintenance and repair
9.1 Care by cleaning
The electric wire rope hoist must always be kept in a
clean condition.
Use protective gloves!
NOTE !
Never use strong cleaning agents to clean the de-
vice. Such cleaning agents might damage or destroy
the device.
All plastic and lacquered surfaces should be cleaned
using a soft, damp cloth and a neutral cleaning agent.
Remove any excess lubricant or leaked oil using a dry,
lint-free cloth.
NOTE !
Oil, grease and cleaning agent are endangering the
environment and must not be given into the waste
water or into the normal household waste. Dispose
these cleaning agents environmentally friendly. The
cleaning rags that are impregnated with oil, grease or
cleaning agent are easily flammable. Collect the
cleaning rags or the cleaning wool in one suitable,
closed container to ensure that they are disposed of
environmentally friendly.
- Do not throw them into the normal household waste.
ESW 900 | Version 2.04
9.2 Maintenance and repair
ATTENTION!
- Maintenance and repair works must only be per-
formed by specialists.
- Use only original spare parts in case of a repair.
If the electric wire rope hoist is not functioning properly,
contact a specialised dealer or our customer service.
Please find the contact data on chapter 1.2 Customer
service.
Immediately reassemble all protective and safety equip-
ment after completing the repair and maintenance of the
device.
Maintenance plan
If an increase in wear is noted during regular inspec-
tions, the maintenance intervals should be decreased in
accordance with the actual signs of wear. Contact the
manufacturer for further information concerning mainte-
nance tasks and intervals. Please find the contact data
on chapter 1.2 Customer service.
Step 1: Lubricate all moving parts of the wire rope hoist
(gears, bearings) with good quality grease.
Step 2: Check the wire rope hoist before each operation
for visible signs of wear.
Step 3: Always ensure that all safety information on the
wire rope hoist is clearly legible.
Care, maintenance and repair
11
Advertisement
Table of Contents
