unicraft ESW 900 Operating Instructions Manual page 13

Wear measurement and replacement of load hooks
Fig. 6: Dimension of the hook - part 1
Fig. 7: Dimension of the hook - part 2
ESW 900 | Version 2.04
Fig. 8: Dimension of the hook - part 3
Fig. 9: Dimension of the hook - part 4
According to DIN 15405 Part 1, the load hook should be
replaced if it has widened by more than 10%.
ATTENTION!
Only genuine replacement parts from the manufac-
turer of the wire rope hoist should be used.
Care, maintenance and repair
13