Chevrolet 2002 S10 Pickup Owner's Manual page 353

Center High-Mounted Stoplamp
1. Remove the lens retaining screws.
2. Remove the lens.
4. Install a new bulb.
5. Reinstall the lens and tighten the screws.
If equipment such as a cap or camper is installed on
your vehicle, a center high
is provided along the driver's side rear frame. This wire
should be used to install a center high
stoplamp in the cap or camper.
3. Remove the bulb.
-
mounted stoplamp feed wire
-
mounted
6-43