Everlast EV720 Owner's Manual page 12

Your treadmill features a walking belt coated with a lubricant. IMPORTANT: Never apply silicone
spray or other substances to the walking belt or walking board. Such substances will deteriorate
the walking belt and cause excessive wear.
How to plug in the power cord
GROUNDING INSTRUCTIONS.
This product must be grounded.
WARNING:
Improper connection of the equipment-grounding
conductor can result in a risk of an electric shock.
Check with a qualified electrician if you are in doubt as
to whether the product is properly grounded. Do not
modify the plug provided with the product if it will not
fit the outlet; have a proper outlet installed by a
qualified electrician. The use of an extension cord with
this product is not recommended. If an extension cord
is needed, use a short (less than 10 feet) heavy gauge
(14 gauge or better) extension cord with a three-prong
(grounded) plug and receptacle.
IMPORTANT: If the power cord is damaged, it must
be replaced with a manufacturer-recommended power
cord.
1. Plug the indicated end of the power cord into
the socket of the treadmill. See drawing on the
right.
2. Plug the power cord into an appropriate outlet
that is properly installed and grounded. See
drawing on the right. IMPORTANT : The
treadmill is not compatible with GFCI-equipped
outlets .
Note: Your power cord and outlet may appear different.
Customer Service 1-888-707-
1880
Email: customerservice@dyaco.ca
TREADMILL OPERATION
11
Dyaco Canada Inc. 2021