Chevrolet 2002 Corvette Owner's Manual page 196

SEEK : Press the right or left arrow to go to
the next or previous station. The radio will seek to
stations with a strong signal only. The sound will mute
while seeking.
To scan stations, press one of the SEEK arrows for
two seconds, and SCAN will appear on the display.
The radio will go to a station, play for a few seconds,
then go on to the next station. Press one of the SEEK
arrows again to stop scanning. The radio will scan to
stations with a strong signal only. The sound will mute
while scanning.
P.SCAN (Preset Scan): Press this button to listen to
each of your favorite stations stored on your pushbuttons
for a few seconds. The radio will scan through each of
the preset stations stored on your pushbuttons, play for
a few seconds, then go on to the next preset station.
The AUTO TONE setting stored for that pushbutton
will be automatically chosen. Press this button or one
of the pushbuttons again to stop scanning. P.SCAN
will be displayed whenever the tuner is in this mode.
-
The channel number (P1 P6) will appear momentarily
just before the frequency is displayed. In FM mode,
this function will scan through both FM1 and FM2 preset
stations and FM1 or FM2 will appear on the display.
The radio will scan preset stations with a strong signal
only. The sound will mute while scanning.
3-20
Setting Preset Stations
The six numbered pushbuttons let you return to your
favorite stations. You can set up to 18 stations (six AM,
six FM1 and six FM2) by performing the following steps:
1. Turn the radio on.
2. Press AM FM to select AM, FM1 or FM2.
3. Tune in the desired station.
4. Press AUTO TONE to select the equalization that
best suits the type of station selected.
5. Press and hold one of the six numbered pushbuttons.
The sound will mute. When it returns, release the
pushbutton. Whenever you press that numbered
pushbutton, the station you set will return and the
AUTO TONE equalization that you selected will
also be automatically selected for that pushbutton.
6. Repeat the steps for each pushbutton.