Chevrolet 2002 Corvette Owner's Manual page 193

While the tape is playing, use the VOL, AUTO TONE,
BAL, FADE, BASS and TREB controls just as you
do for the radio. Other controls may have different
functions when a tape is inserted. The display will show
the tape symbol and an arrow to show which side of the
tape is playing.
If you hear nothing or hear just a garbled sound, it may
not be in squarely. Press EJECT to remove the tape and
start over.
The player is able to detect a tight or broken tape, and
will eject the tape. The radio will go back to playing the
last station selected.
The player automatically senses the cassette for metal or
-
CrO and sets the pre emphasis. Anytime a tape is
2
inserted, the top side is selected to play first.
If an error appears on the display, see "Cassette Tape
Messages" later in this section.
1 PREV (Previous): Press this pushbutton to go to
the previous selection on the tape if the current selection
has been playing for less than eight seconds. If this
pushbutton is pressed and the current selection has been
playing for more than eight seconds, it will go to the
beginning of the current selection. Your tape must have
at least three seconds of silence between each selection
for previous or seek to work. The tape direction arrow
blinks and the sound will mute during previous or
seek operation.
2 PROG (Program): Press this pushbutton to play
the other side of the tape.
3 NEXT: Press this pushbutton or to go to the next
selection on the tape. If you hold this pushbutton or
press it more than once, the player will continue moving
forward through the tape. Your tape must have at least
three seconds of silence between each selection for next
to work. The tape direction arrow blinks and the sound
will mute during next or seek operation.
4 REV (Reverse): Press this pushbutton to reverse the
tape rapidly. Press it again to return to playing speed.
The radio will play the last selected station while the
D
tape reverses.
5 (Dolby): Press this pushbutton to reduce
background noise. The double
on the display.
Dolby Noise Reduction is manufactured under a
license from Dolby Laboratories Licensing Corporation.
-
Dolby and the double D symbol are trademarks of
Dolby Laboratories Licensing Corporation.
-
D symbol will appear
3-17