Table of Contents
Advertisement
6. Remove the bulb by pulling the bulb straight out.
7. Snap a new bulb into the socket.
8. Reinstall the bulb assembly by reversing
Steps 1 through 5, making sure the lower leg
of the headlamp bracket is properly seated into
-
the wedge
shaped retainer.
6-38
Front Park and Turn Signal Lamps
1. Follow Step 1 under "Headlamps."
2. Place the tip of a screwdriver through the rectangle
hole in the headlamp bracket. Apply pressure to the
snap feature (toward the outboard side of the
vehicle). Guide the lamp forward.
Advertisement
Chapters
Table of Contents
