Westfalia Joker Maintenance And Operation page 5

Clock
It is not necessary to switch on the ignition before using the clock.
The display constantly shows the time.
To Set the Time
- Press button 1 and either button 4 or 5 at the same time
To Switch on Heating: (possible to be independent from the
previous choice)
- Press button 3, the possible heating time will appear in the
display in minutes
- Set the temperature with the thermostat
To switch on the heating for long term use:
- Press buttons 1 & 3 at the same time
- The display will show 00
Translated into English by www.westfaliat3.info – a useful website for VW Westfalia T25 / T3 / Vanagon Camper enthusiasts.
To Switch off Heating:
- Press button 3
- The fan will continue to run until the unit has cooled, and
then will switch off automatically
The display allows you to choose 3 different times for the heating
to come on. After pressing button 2 once, twice or three times,
memories A, B, or C will be displayed.
You will reach the neutral position by pressing button 2 again. The
time will show and the memory will be saved.
Setting Pre -Set Times:
- Press button 2
- Memory lights up (either A, B, or C will light up)
- By pressing button 4 & 5, the desired pre-set time will be
saved in the memory of A, B or C.
To Erase Pre -Set Times:
(Heating switches on at a pre-set time)
- Press button 2.
- Memory lights up (A, B, or C)
- Pre-Set time appears on the display
- After 20 seconds, the actual time appears on the display.