Tables - Westfalia Joker Maintenance And Operation

To Lower the Bed:
If the back seats are equipped with head rests, these need to be
removed before building the bed.
To Build the Bed:
- Loosen the seats by pulling Knob (A).
- Pull the seats up slightly and forwards.
The back seat will then fall into the bed position. This will then
form the double bed.
To Return Seats to the Seating Position:
- Pull the seats up by 90 degrees until they click into place.
- Put the seats back, until they are secured into pla ce.
Note: In the flooring of vehicles with a PVC Floor, there are
tracks to secure a middle seat. Where a middle seat is built in, the
lower double bed cannot be used.
Double Bed in Pop Top Roof:
The roof must be set open:
- Pull the upper bed unit about 10 cm forward and fold
down.
Translated into English by www.westfaliat3.info – a useful website for VW Westfalia T25 / T3 / Vanagon Camper enthusiasts.
To Put Back
- Fold the bed unit at the front down, and push back.
Double bed in the High Top Roof:
To assemble the bed into position:
- Release the catches and fold down the flap.
- Pull the bed extension forwards at the same time.
- Put in the middle cushion.
To put the bed away, do the above steps in reverse.
Note: If there are no security measures for children, small children
should sleep in the lower beds.
Warning ! During the journey, no-one should occupy the
upper beds.

1.9 Tables

Swivel Table
- Loosen the table using the knobs (A) & (B)
- Adjust the table to the required position
- Secure using the knobs (A) & (B)