Table of Contents
Advertisement
Parameter
IP Address
Subnet Mask
Default Gateway
Address
DHCP Option
Access to DHCP
ESSID
Transmit Antenna
VLAN Link Type
VLAN ID –
Management
Best AU Support
Preferred AU MAC
Address
Authentication
Algorithm
Default Key ID
WEP Key 1-4
Once the basic parameters are configured, the unit must be reset in
order to activate the new configuration.
Verifying Proper Operation
1
Verify that the PWR LED on the SU-M unit is on.
2
Confirm that the PC is operational.
3
Send and receive a test message from the vehicle in order to
confirm the wireless link.
Default Value
10.0.0.1
255.255.255.0
0.0.0.0
Disable
From Wlan Only
ESSID1
Antenna 1
Hybrid Link
65535
Disable
00-00-00-00-00-00
(none)
Open System
1
0000000000 (none)
Preliminary Configuration
C
HAPTER
Comment
Must be the same as
ESSID the Base
Station AU.
Applicable only when
Best AU Support is
enabled
Can be changed to
Shared Key only after
configuring the WEP
Key and the Default
Key ID
3-3
3
Advertisement
Table of Contents
