Chevrolet 2000 Tahoe Owner's Manual page 93

Table of Contents

Advertisement

NOTICE:
Your engine is designed to work with the
electronics in your vehicle. If you add electrical
parts or accessories, you could change the way
the engine operates. Before adding electrical
equipment, check with your dealer. If you don't,
your engine might not perform properly.
If you ever have to have your vehicle towed,
see the part of this manual that tells how to do
it without damaging your vehicle. See "Towing
Your Vehicle" in the Index.
Engine Coolant Heater (If Equipped)
To Use the Engine Coolant Heater
1. Turn off the engine.
2. Open the hood and unwrap the electrical cord.
The cord is located on the driver's side of the engine
compartment, near the power steering fluid reservoir.
3. Plug it into a normal, grounded 110
In very cold weather,
0 _ F (
18 _ C) or colder,
-
the engine coolant heater
can help. You'll get easier
starting and better fuel
economy during engine
-
warm
up. Usually, the
coolant heater should be
plugged in a minimum of
four hours prior to starting
your vehicle.
-
volt AC outlet.
2-17

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Suburban 2000

Table of Contents