Nature Power 37800 User Manual page 7

Connecting inverter to 12V battery / vehicle
1. Locate the Positive and Negative terminals on the inverter
2. From the POSITIVE (RED) and the NEGATIVE (BLACK) terminals, loose the screws,
3. Place the cable's POSITIVE (RED) bare end into the POSITIVE (RED) inverter
terminal. Place the NEGATIVE (BLACK) bare end into the NEGATIVE (BLACK) inverter
terminal.
4. Tighten both terminal screws.
5. Switch the inverter to OFF (O) position. Connect battery clamp to 12V battery, positive
to positive, negative to negative.
or use the 12V DC car plug connecting to the 12V outlet on vehicle.
Operating instruction
+ -
Page 7 of 12