Taillamps And Rear Turn Signal Lamps - Chevrolet 1998 Cavalier Owner's Manual

3.
Disconnect the bulb base from me socket by lifting
4. Snap a new bulb into the socket.
5 . Replace the bulb assembly by reversing Steps 1
through 3, making sure the lower leg of the
headlamp bracket is properly seated into the wedge
shaped retainer.
the plastic locking tab.
Rear Exterior
Taillamps and Rear Turn Signal Lamps
For the type of bulb to use, see "Replacement Bulbs" in
the Index. The following instructions explain how to
change each bulb.
1. Unscrew the fastener that holds down the trunk trim.
2. Remove the taillamp bulb assembly by turning it
one-quarter of a turn to the left.
6-37