How To Add Transaxle Fluid - Chevrolet 1998 Cavalier Owner's Manual

Then, without shutting off the engine, follow these steps:
1. If you have a three speed
automatic transaxle, the
handle on the transaxle
dipstick is a red ring.
Pull out the dipstick and
wipe it with a clean rag
or paper towel.
2. Push it back in all the way, wait three seconds and
then pull it back out again.
- 1
3. Check both sides
of the dipstick,
and read the lower
level. The fluid
level must be in the
cross-hatched area.
4. If the fluid level is in the acceptable range, push the
dipstick back in all the way.
How to Add Fluid
Refer to the Maintenance Schedule to determine what
kind of transaxle fluid to use. See "Recommended
Fluids and Lubricants" in the Index.
If the fluid level is low, add only enough of the proper
fluid to bring the level into the cross-hatched area on
the dipstick.
6-20