Table of Contents
Advertisement
AUTOMATIC OVERDRIVE
(@):
This position is for normal driving. If you need more
power for passing, and you're:
- Going less than about 35 mph (56 km/h), push your
accelerator pedal about halfway down.
- Going about 35 mph (56
km/h)
or more, push the
accelerator all the way down.
You'll shift down to the next gear and have more
power.
DRIVE (D): This position is also used for normal
driving, however, it offers more power and lower fuel
economy than AUTOMATIC OVERDRIVE
(@).
Here are some times you might choose DRIVE (D)
instead of AUTOMATIC OVERDRIVE
(a):
-
When driving on hilly, winding roads.
- When towing a trailer, so there is less shifting
- When going down a steep hill.
between gears.
SECOND (2): This position gives you more power but
lower fuel economy. You can
use SECOND (2)
on hills.
It can help control your speed as you go down steep
mountain roads, but then you would also want to use
your brakes off and on.
I
NOTICE:
Don't drive in SECOND (2) for more
than
25
miles
(40 km), or at speeds over
55 mph (88
km/h),
or
you can damage your transmission. Use
AUTOMATIC OVERDRIVE
(@)
or DRIVE
(D)
as much as possible.
Don't shift into SECOND
(2)
unless you are going
slower than 65 mph (105 kmk), or you can
damage your engine.
2-32
Advertisement
Table of Contents
