Table of Contents
Advertisement
WARNING
• As part of good hygiene, always follow cleaning instructions.
Some cleaning products may damage the AirMini tube and
affect its function, or leave harmful residual vapours that could
be inhaled if not rinsed thoroughly.
• The AirMini connectors and AirFit P10 for AirMini contain a vent
system to prevent carbon dioxide build-up in the mask. The vent
system must be kept clean and clear of contamination in order
to function correctly. Blocking or modifying the vent system
may result in excessive carbon dioxide rebreathing.
• Regularly clean your AirMini tube, connectors and mask
components to receive optimal therapy and to prevent the
growth of germs that can adversely affect your health.
• Regularly inspect the HumidAirX/HumidAirX Plus and follow the
cleaning and maintenance instructions to prevent the growth of
germs that can adversely affect your health.
CAUTION
If any visible deterioration of a system component is apparent
(cracking, discoloration, tears etc.), the component should be
discarded and replaced.
Disassembling
Remove the connector (F20 and N20 only)
1. Remove the connector
from the mask by
pressing the side buttons
and pulling it away
10
Advertisement
Table of Contents
