ConvaTec ESTEEM SYNERGY + Manual

ESTEEM SYNERGY
WITH MOULDABLE BASEPLATE
1
Mouldable baseplate application
Measure the stoma and
select the appropriate size
Mouldable baseplate.
Press the baseplate into place and if
necessary re-adjust the rolled Mouldable
Technology™ to create a snug fit.
3
Closing the pouch
TIP
If using a drainable pouch
over a closed pouch, we
recommend you close the tail
closure before applying your
pouch to the baseplate.
TM
Roll and mould the disc to the size of the
stoma. Do not stretch, pull or cut. Pinch into
place once desired size is reached.
Peel off the white release paper from
the tape border. Smooth and hold
the baseplate in place for 30 seconds.
Fold the end up towards you
until the interlocking closures
line up. Press and pinch
around the closure to secure.
Peel off clear release liner
and position the circular
opening over your stoma.
Press gently against
skin, smoothing out
any wrinkles.
Turn the Lock-it-Pocket™
inside-out to tuck
tail inside.