3. Holding the base
of the bulb, pull
the bulb straight
out of the socket.
4. Push the new bulb into the socket until
it clicks.
5. Put the socket back into the parkinghum signal lamp assembly and turn
it clockwise until it locks in place.
Rear Lamps
1. Open the tailgate.
2. Remove the
screws from the
lamp assembly
near the tailgate
latch. Pull out the
assembly.
3. Pull the assembly
away from the
pickup side
panel.
4. Turn the socket
counterclockwise
to remove it.
Push the tab in
while you turn
the socket.
6-34