Chevrolet 1995 S-10 Pickup Owner's Manual page 125

FWD
-
To
rapidly advance the tape, press
4
or
in the direction that the
amber arrow points and the tape will rapidly go forward until you press the
STOP-EJECT button lightly.
REV
-
To rapidly reverse the tape, press
4
or
b
in the opposite direction
that the amber arrow points and the tape will rapidly reverse until you press
the STOP-EJECT button lightly.
SEARCH - Press the SEARCH button to the recessed position.
Press
b
to go to the beginning of the next selection.
Press
4
and the tape will reverse to the beginning of the current selection.
PROGRAM
-
To go from one side of the tape to the other, press the
PWR-VOL-PROG-RCL knob.
STOP-EJECT
-
To remove the tape or stop the tape and switch to radio,
press the STOP-EJECT button.
If "Cln" (Clean) appears on the display when you insert your cassette tape,
your cassette player needs to be cleaned. It will still play cassette tapes but it
should be cleaned to prevent damage to your cassette tapes and the cassette
tape player. See "Care of Your Cassette Tape Player" later in this section.
After you have cleaned the cassette tape player, press and hold EJECT for 5
seconds to reset the the "Cln" indicator. The radio will display
"-
- -', to
show the clean feature has been reset.
Your Delco system may be able to receive C-QUAM@ stereo broadcasts.
Many
AM
stations around the country use C-QUAM@ to produce stereo,
though some do not. C-QUAM@ is a re istered trademark of Motorola Inc.
If your Delco system can get C-QUAM signals, your STEREO light will
come on when you are receiving stereo.
%
3-12