Tightening Wheel Nut; Tightening Sequence; Storing The Jack And Spare Tire - Chevrolet 1995 S-10 Pickup Owner's Manual

Tightening Wheel Nut
Tightening Sequence
,
Use the wrench to tighten the wheel nuts firmly in a criss-cross sequence as
shown. Remove the wheel blocks.
Storing the Jack and Spare Tire
Return the jack, wheel wrench and wheel blocks to the proper location
behind the seat. Secure the items and replace the jack cover, if you have
one. Put the flat tire where the spare tire was stored. If you have the
underbody carrier:
1. Put the tire on the ground at the rear of the vehicle, with the valve stem
pointed down and to the rear.
2. Pull the retaining bar through the wheel.
NOTE: With ZR2 option, spring and retainer must be separated to
insert through wheel opening.
5-31