Advertisement
5.It will require to install the serial driver if it is the first to use this tool,
the tips as below:
① Open SiLabsUSBDriverDisk.dmg
② And then it will pop-up below installation package, open Silicon Labs VCP
Driver.pkg, please just complete the installation as per the tips.
6.We are able to calibrate after the serial driver is successfully installed.
① Click the"Search" ，find and choose"dev/cu.SLAB_USBtoUART" option
in the combobox.
7
Hohem Techonology Co.,Ltd http://www.hohem-tech.com
7.Put the gimbal like this picture, and absolutely insuring the gimbal is
still at the horizontal. And then click "Init Gyro". At this moment, data
will appear on the three data frames of the gyro. And click "Init Gyro"
continuously until the data turns green color. And click "Save All".
It will appear "Init Gyro Succeed". And the initialize gyro is
finished. (Attention! Does the "Save All" step)
Tel:0755-86573216 Email:service@hohem-tech.com
Advertisement
