Lexus IS300H 2017 Manual page 57

Table of Contents

Advertisement

Pop Up Hood precautions
Before scrapping your vehicle, make sure to contact any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer.
The Pop Up Hood system cannot be reused once it has operated. Have it replaced by
any authorized Lexus retailer or Lexus authorized repairer, or any reliable repairer.
Conditions under which the Pop Up Hood may not operate properly
The Pop Up Hood may not operate properly under the following conditions:
If a pedestrian collides with the right or left corner of the front bumper or the side of the
vehicle. As such impacts may be difficult to detect, the system may not operate.
If the vehicle speed is not detected correctly, such as if the vehicle is sliding sideways,
the system may not operate properly.
Conditions under which the Pop Up Hood may not operate
The Pop Up Hood may not operate in the following situations:
Colliding with a lying pedestrian
A frontal impact applied to the front bumper while driving at speeds outside of the
operational speed range
A side impact or rear impact
A vehicle rollover (In some accident situations, the Pop Up Hood may operate.)
NOTICE
Pop Up Hood precautions
Make sure to close the hood before driving, as the system may not operate properly if
the hood is not fully closed.
Make sure that all 4 tires are of the specified size and inflated to the specified tire
pressure (P. 652). If tires of a different size are used, the system may not operate
properly.
If something has hit the area around the front bumper, the sensors may be damaged
even if the Pop Up Hood has not operated. Have the vehicle inspected by any autho-
rized Lexus retailer or Lexus authorized repairer, or any reliable repairer.
Do not remove or repair the parts or wiring of the Pop Up Hood, as doing so may
cause accidental operation or prevent the system from operating properly. If repair or
replacement is necessary, contact any authorized Lexus retailer or Lexus authorized
repairer, or any reliable repairer.
Do not remove such components as the front bumper, hood or suspension, or
replace them with non-genuine parts, as doing so may prevent the system from oper-
ating properly.
Do not install anything to the front bumper or hood, as doing so may prevent the sen-
sors from detecting an impact correctly and prevent the system from operating prop-
erly.
Do not close the hood with force or apply load to the lifters, as doing so may damage
the lifters and prevent the system from operating properly.
Do not modify the suspension, as changes made to the vehicle height may prevent
the system from operating properly.
1-1. For safe use
57
1

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Is200t 2017

Table of Contents