Lexus IS300H 2017 Manual page 261

WARNING
Do not attach window tinting to the windshield.
●
Replace the windshield if it is damaged or cracked.
●
If the windshield needs to be replaced, contact your authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer.
Do not get the camera sensor wet.
●
Do not allow bright lights to shine into the camera sensor.
●
Do not dirty or damage the camera sensor.
●
When cleaning the inside of the windshield, do not allow glass cleaner to contact the
lens. Also, do not touch the lens.
If the lens is dirty or damaged, contact your authorized Lexus retailer or Lexus autho-
rized repairer, or any reliable repairer.
Do not subject the camera sensor to a strong impact.
●
Do not change the installation position or direction of the camera sensor or remove it.
●
Do not disassemble the camera sensor.
●
Do not install an electronic device or device that emits strong electric waves near the
●
camera sensor.
Do not modify any components of the vehicle around the camera sensor (inside rear
●
view mirror, etc.) or ceiling.
Do not attach any accessories that may obstruct the camera sensor to the hood, front
●
grille or front bumper. Contact your authorized Lexus retailer or Lexus authorized
repairer, or any reliable repairer for details.
If a surfboard or other long object is to be mounted on the roof, make sure that it will
●
not obstruct the camera sensor.
Do not modify the headlights or other lights.
●
4-5. Using the driving support systems
261
4