Lexus IS300H 2017 Manual page 618

Table of Contents

Advertisement

618
8-2. Steps to take in an emergency
Start the hybrid system.
12
To inject the sealant and inflate the
13
tire, turn the compressor switch on.
Inflate the tire until the specified air
14
pressure is reached.
The sealant will be injected and
1
the pressure will surge and then
gradually decrease.
The air pressure gauge will dis-
2
play the actual tire inflation pres-
sure about 1 minute (5 minutes at
low temperature) after the switch
is turned on.
Inflate the tire until the specified
3
air pressure.
• Turn the compressor switch off
and then check the tire infla-
tion pressure. Being careful
not to over inflate, check and
repeat the inflation procedure
until the specified tire inflation
pressure is reached.
• If the tire inflation pressure is still lower than the specified point after
inflation for 35 minutes with the switch on, the tire is too damaged to be
repaired. Turn the compressor switch off and contact any authorized
Lexus retailer or Lexus authorized repairer, or any reliable repairer.
• If the tire inflation pressure exceeds the specified air pressure, let out
some air to adjust the tire inflation pressure. (P. 622, 652)

Advertisement

Table of Contents

Troubleshooting

loading

This manual is also suitable for:

Is200t 2017

Table of Contents