BSM main switch
1
Pressing the switch turns the system on or off. When the switch is set to on, the
switch's indicator illuminates and the buzzer sounds. Common switch for BSM func-
tion and RCTA function.
Outside rear view mirror indicators
2
BSM function:
When a vehicle is detected in the blind spot, the outside rear view mirror indicator
comes on while the turn signal lever is not operated. If the turn signal lever is oper-
ated toward the detected side, the outside rear view mirror indicator flashes
RCTA function:
When a vehicle approaching from the right or left at the rear of the vehicle is
detected, both outside rear view mirror indicators will flash.
RCTA buzzer (RCTA function)
3
If a vehicle approaching from the right or left at the rear of the vehicle is detected, a
buzzer will sound. The buzzer also sounds for approximately 1 second immediately
after the BSM function is operated to turn the system on.
Monitor screen display (RCTA function)
4
If a vehicle approaching from the right or left at the rear of the vehicle is detected, the
RCTA icon (P. 344) for the detected side will be displayed on the monitor screen.
This illustration shows an example of a vehicle approaching from the left at the rear of
the vehicle.
4-5. Using the driving support systems
335
4