Lexus IS300H 2017 Manual page 222

222
4-2. Driving procedures
Steering lock
■
After turning the power switch off and opening and closing the doors, the steering wheel
will be locked due to the steering lock function. Operating the power switch again auto-
matically cancels the steering lock.
When the steering lock cannot be released
■
"Steering Wheel Lock Press Power Switch while
Turning Wheel" will be displayed on the multi-
information display.
Check that the shift lever is in P. Press the power
switch while turning the steering wheel left and
right.
Steering lock motor overheating prevention
■
To prevent the steering lock motor from overheating, operation of the motor may be sus-
pended if the hybrid system is turned on and off repeatedly in a short period of time. In
this case, refrain from operating the hybrid system. After about 10 seconds, the steering
lock motor will resume functioning.
When "Smart Entry & Start System Malfunction See Owner's Manual" is displayed on
■
the multi-information display
The system may be malfunctioning. Have the vehicle inspected by any authorized Lexus
retailer or Lexus authorized repairer, or any reliable repairer immediately.
If the "READY" indicator does not come on
■
In the event that the "READY" indicator does not come on even after performing the
proper procedures for starting the vehicle, contact any authorized Lexus retailer or
Lexus authorized repairer, or any reliable repairer immediately.
If the hybrid system is malfunctioning
■
P. 585
If the electronic key battery is depleted
■
P. 549
Operation of the power switch
■
If the switch is not pressed shortly and firmly, the power switch mode may not change or
●
the hybrid system may not start.
If attempting to restart the hybrid system immediately after turning the power switch off,
●
the hybrid system may not start in some cases. After turning the power switch off,
please wait a few seconds before restarting the hybrid system.
If the smart entry & start system has been deactivated by a customized setting
■
P. 628