Panasonic CS-ZC15MKY-3 Service Manual page 19

Pull Out Indoor Piping
Install the Indoor Unit
Hook the indoor unit onto the upper portion of
installation plate.
(engage the indoor unit with the upper edge of the
installation plate).
Ensure the hooks are properly seated on the installation
plate by moving it in left and right.
Take Out Front Grille

Remove air filter.

Open 2 caps on the front grille, and then remove
the 2 mounting screws as shown in the illustration.

Pull the lower section of the front grille towards you
to remove the front grille.
Insert the Connecting Cable and Power Supply Cord
Secure the Indoor Unit

Tighten the indoor unit with 2 pcs of screw to the
wall.
19