Page 1
Item #: B38LO2D Assembly Instruction Please visit our website for the most current instructions, assembly tips report damage, or request parts. www.walkeredison.com Revised 12/2020 Copyright 2018, by Walker Edison Furniture Co., LLC. All rights reserved. P .1...
Page 4
5,5x28mm Cam Bolt 15 pcs 14x14mm Cam Lock 15 pcs 4,0x3 mm 13 pcs M4x22mm 04 pcs 3,5x20 mm 02 pcs 3,5x16 mm 22 pcs 3,0x16 mm 18 pcs 8,0x30 mm 23 pcs Knob 02 pcs Support 04 pcs Washer 02 pcs Magnetic Latch 01 pc...
Page 5
Jamb 01 pc Hinge 02 pcs 01 pc 5,5x25 mm 02 pcs 3,5x20 mm 02 pcs 02 pcs 02 pcs 02 pcs 01 pc P .5...
Page 6
Step 1 Insert wooden dowel (H) into part (1), (2), (3), (4), (6), (7) and (8). Ø 8,0x30 mm Step 2 Attach minifix cam lock (A) and support (J) to part (2 and 3). 5,5x28 Ø P .6...
Page 7
Attach hardware (L1) and (K) in the pre drilled side of part (5) using screw (E). Step 3 Fixing hardware (M) with screw (F). Attach cam bolt (A) into part (5). 5,5x28 Ø Ø 3,5x20 mm Ø 3,5x16 mm Step 4 Secure part (1) to part (2) with screw (C).
Page 8
Step 5 Secure part (3), (4), to part (1) with cam bolt (B). Attach part (16) to part (1) with screw (C). Ø 4,0x30 mm Step 6 Secure part (5) to part (2), (3), (4) using minifix cam bolt (B).
Page 9
Secure part (5) to parts (6), (7), (8) with screw (C). Step 7 Ø 4,0x30 mm Step 8 Secure back panel (9) and profile (O) to body with screws (G). Ø 3,0x16 mm P .9...
Page 10
Step 9 Insert Shelf (10). Attach hardware (S) to part (4) and (2). First, secure part (14) to hardware (U) with screw (F). Second, secure Step 10 hardware (U) to part (15) with screw (F). Attach hardware (L2) with screw (F). Ø...
Page 11
Step 11 Attach hardware (N) to door (11) with screw (F). Attach part (11) to body with screw (F). Insert knob (I) with screw (D). M 4x22 mm Ø 3,5x16 mm P.11...
Page 12
Step 12 Insert knob (I) to part (15) with screw (D). Attach hardware (R) with screw (P). M 4x22 mm Ø 5,5x25 mm Step 13 Insert part (12) and (13) with screw F. Ø 3,5x16 mm P.12...