Page 2
Use only a mattress with the dimensions 74-75 in. L x 37.5-38.5 in. W x 6 in. H is recommended. The use of a water or sleep flotation mattress is prohibited. Replacement parts, may be obtained from any of Walker Edison Furniture Company’s dealers or bycontacting us online at www.walkeredison.com.
Page 5
Step 1 Pre Hole 3,5x16mm Wheel 10x40mm Insert dowel (A) and attach wheels (G) using screw (F) to both parts (2). Step 2 1/4”x70mm Use Hex Key (E), bolt (B) and nut ( C ) to attach parts (2) to parts (1,3)
Page 6
Step 3 OPTION - 1 1" 1" ``INSTALL SLAT KIT WITH TAPE ON TOP (FACING UP)`` Use screw (D) to attach parts (4) to trundle frame 4,0x30mm Step 4 OPTION - 2 Place parts (5) on top of the mattress supports, and the slide parts (6) into channels on parts ( 1,3).