Using The Product Features; Driving Mode; Parking Mode; Manual Recording (Rec) - BMW Advanced Car Eye 3.0 User Manual

Hide thumbs Also See for Advanced Car Eye 3.0:
Table of Contents

Advertisement

Using the product
features
ACE 3.0 records videos while the vehicle is in
operation.
When you start the vehicle and start driving,
the product can check any damage caused by
accidents that occurred in the front and rear
(rear camera is optional) areas of the vehicle
while it was in driving mode and from any
accidents that occurred while the vehicle was
parked and using parking mode.

Driving mode

When you start the vehicle, the status LED
will turn on with a voice prompt and driving
mode will start.
Driving recording: While driving, videos are
recorded in 1 minute segments and stored in
the "DRIVING" folder.
Incident recording: When an impact to the
vehicle is detected, the video record from
10 seconds before the incident to 50 seconds
after the incident is stored in the "INCIDENT"
folder.
• You can choose between the two
driving modes.
• Be sure to check if the laws and
regulations of the country allow
continuous video recording in driving
mode.

Parking mode

When the engine is turned off and the set
time for the product's exit phase elapses, the
product automatically switches to the parking
mode.
When an impact is detected while parking,
a video record from 10 seconds before the
impact to 20 seconds after the impact is
saved in the "PARKING" folder.
*Exit phase refers to the assumed amount of
time for the driver to leave the vehicle after
the engine is turned off.
Videos of impacts recorded within this
time frame do not add up to the number of
incidents while parked, which is reported by
the product or the ACE 3.0 App.
** Videos of impacts that are recorded during
entry phase do not add up to the number
of incidents while parked, since the driver
is considered to be inside the vehicle in the
moment of recording.
8
• Be sure to regularly check if the
laws and regulations of the country
allow using the parking mode.
• If the ACE 3.0 app and the product
are connected during the exit
phase, the parking mode will not be
initiated as the driver is considered
to be staying inside the vehicle.

Manual recording (REC)

You can manually record/take videos and
pictures.
Press the record (
camera to start recording and save it in the
"SNAPSHOT" folder.
Video: From 10 seconds before pressing
the button to 50 seconds after pressing the
button, total 1 minute
Select between video or picture in
>
ACE 3.0 app
settings.

HDR(High Dynamic Range)

You can record the video with the front
camera in high quality by setting the HDR
(High Dynamic Range) feature.
The HDR feature provides a clear screen
that looks just like you were seeing it with
your own eyes by extending video's contrast
ratio, rendering the objects on the video more
distinguishable.

Night Vision

With the Super Night Vision feature, you can
record videos that are much brighter than
videos recorded without this feature. This
feature is enabled by real-time image signal
processing (ISP) that improves the brightness
of videos recorded while parked at night.

GPS

The GPS feature is not approved in some
countries for legal reasons, so the feature
may be restricted or unavailable in certain
countries.
Check the laws and regulations of your
country before using the product for the first
time.
) button on the front
>
Settings
Recording

Hide quick links:

Advertisement

Table of Contents
loading

This manual is also suitable for:

Advanced car eye 3.0 pro

Table of Contents