Settings
On the main screen of the ACE 3.0 app,
touch Blackbox Settings. Each feature of the
product can be set and used according to the
user's need or preference.
In the ACE 3.0 app, select Settings
System Settings
delete all settings and saved data on
the product.
Camera settings
■
Audio Recording: Turn voice recording on
or off.
■
Rec Button Action: Select either video or
picture when the recording (
pushed.
■
HDR: Turn HDR on or off.
Night Vision: Turn Night Vision on or off.
■
■
Channel setting: Select either 1ch or 2ch as
the desired setting.
If the product needs to be formatted
when changing channel settings, a
format notification pop-up window will
be displayed. Touch OK to delete all
stored data.
■
Brightness-Front: Select the desired
brightness.
■
Brightness-Rear: Select the desired
brightness.
10
>
>
Reset settings to
) button is
Recording settings
Driving mode
■
Driving mode: Select either Continuous
recording or G-Sensor only to be used in
Driving mode.
When changing the mode to Incident
recording only, the memory can be
formatted according to the set memory
partition.
■
G-Sensor Sensitivity: Select the desired
driving incident sensitivity.
■
Enter phase: Set the time during which
vibrations detected while getting into the
vehicle are not recognized as events.
■
Exit phase: Set the time period during
which vibrations that are detected when
getting out of the vehicle are not recognized
as events.
Parking mode
■
Parking Mode: Select Disable when not
using parking mode.
■
G-Sensor Sensitivity: Select the desired
parking incident sensitivity.
Volume settings
■
Beep: Set the product's default volume.
■
Voice guidance: Set the volume for voice
guidance.
■
Video: Set the video playback volume.