Table of Contents
Advertisement
Using the product
MicroSD memory card
Ensure that the product is turned off before
inserting the memory card.
If the memory card is removed or inserted
while the product is turned on, the stored data
may be lost or the product may malfunction.
Remove the protective film
from the camera lens
Remove the protective film from the front
camera lens before installing and using the
product.
Mounting/Removing the
Front Camera
The front camera can be mounted or removed
by simultaneously pressing the buttons on
both sides of the cradle at the same time.
When connecting the product and the cradle,
first combine the groove at the bottom of the
cradle with the product, and then completely
assemble the product and the cradle.
Removing the front camera also disables the
rear camera (optional).
1
3
2
Be sure to install and remove the
front and rear camera (optional) while
the product is turned off. The stored
media may be lost or the product may
malfunction.
1
1
2
1
Turning the product on
Driving mode starts when the vehicle is
started, and the product and the ACE 3.0 app
can be connected.
For more information, refer to the
instruction manual provided with the
vehicle.
Turning the product on/off
manually
■
When the engine is running, or when you
are getting of the vehicle, briefly press the
power button to turn on the product.
■
Press and hold the power button for
3 seconds to turn off the product.
Resetting the product
Press and hold both the power (
and the record (
top of the product to factory reset the product.
) button
) button together on the
7
Hide quick links:
Advertisement
Table of Contents
