Safety Notices - Siemens SIMATIC NET SCALANCE XP-200 Operating Instructions Manual

Industrial ethernet switches
Table of Contents

Advertisement

Safety notices

Read the safety notices
Note the following safety notices. These relate to the entire working life of the device.
You should also read the safety notices relating to handling in the individual sections,
particularly in the sections "Installation" and "Connecting up".
To prevent injury, read the manual before use.
NOTICE
Loss of water and dust protection
If you open the device, it loses its water and dust protection.
• Do not open the device.
If the is not adhered to, the manufacturer's guarantee is lost.
Safety notices on use in hazardous areas
General safety notices relating to protection against explosion
EXPLOSION HAZARD
Do not open the device. There are no serviceable parts inside of the device.
EXPLOSION HAZARD
Do not open the device when the supply voltage is turned on.
Safety notices when using the device according to Hazardous Locations (HazLoc)
If you use the device under HazLoc conditions you must also keep to the following safety notices
in addition to the general safety notices for protection against explosion:
This equipment is suitable for use in Class I, Division 2, Groups A, B, C and D or non-hazardous
locations only.
This equipment is suitable for use in Class I, Zone 2, Group IIC or non-hazardous locations only.
SCALANCE XP-200
Operating Instructions, 03/2021, C79000-G8976-C428-08
CAUTION
WARNING
WARNING
2
9

Advertisement

Table of Contents
loading

Table of Contents