Plumbing
DI water connection
(available as an optional accessory)
As an option the machine can be
supplied for connection to a DI water
supply of:
Acceptable water pressure
(flow rate): 10 - 147 psi
Recommended water pressure
(flow rate): 25-60 psi
^ The DI pressure-tested hose (marked
"H
O pur") with a
2
female hose thread must be
connected onsite to the DI inlet for
purified water.
If the machine has a DI water
connection which is not going to be
used, the electronics will need to be
reprogrammed by a Miele technician.
The inlet hose will remain on the rear
of the machine.
54
3
/
" (19 mm) GHT
4