Miele G 7881 Operating Instructions Manual page 43

2. Buzzer
This special function allows you to
program a buzzer (lasting up to a
maximum of 30 seconds) for the
following functions:
– Program end = Constant buzzer
– Fault warning = Buzzer at one
second intervals
^ Turn the program selector to the
"Stop" f position.
^ Turn off the machine.
^ Press and hold "Display" ß and
"Start" 6 at the same time.
Simultaneously, turn the machine on
with the "On/Off" button.
The current program status "P..." will
appear in the display and the
"Fill/Drain" indicator will illuminate.
^ Press "Drying" 0 four times. "E04"
(programming level 4) appears in the
display.
Programming special functions
^ Turn the program selector to "Rinse".
A number from 20 to 27 will appear in
the display:
20 = Buzzer switched off
21 = Buzzer at end of program
(standard setting)
22 = Fault indication
23 = Fault indication and buzzer at
end of program
^ Press the "Display" ß button as
many times as necessary, or hold it
pressed in, until the desired value
appears in the display.
^ Press the "Start" 6 button. "SP"
appears in the display.
^ Press "Start" 6 again. The change
has been recorded.
Value set:________.
Turning the buzzer off
The buzzer can be turned off early by:
– Turning the program selector to the
"Stop" f position.
– Pressing the "Display" ß button.
– Interrupting the power supply (e.g.
by opening and closing the door).
39