For future servicing, please
document any alterations to the
standard factory settings.
Enter any alterations in the field
Value set:________.
General notes
Program selector positions that have
not been allocated a function are
indicated in the middle part of the
display by a bar (-).
The programming level is called up via
the "Stop" f position.
To program special functions
Enter the programming level of the
controls first before performing special
functions as follows:
1. Setting the liquid detergent
dosage and priming the
dispensing system
^ Turn the program selector to the
"Stop" f position.
^ Turn off the machine.
^ Press and hold "Display" ß and
"Start" 6 at the same time.
Simultaneously, turn the machine on
with the "On/Off" button.
The current program status "P..." will
appear in the display and the
"Fill/Drain" indicator will illuminate.
^ Press "Drying" 0 twice.
"E02" (programming level) wil appear
in the display.
Value set:
Programming special functions
1.1 DOS 1 (liquid detergent) via the
optional DOS-Module G 60
1.1.1 Setting the dosage
Follow the dosage recommedation
of the cleaning agents manufacturer.
^ Turn the program selector to "Wash".
The display will show either of the
following:
Display
10
0.10 - 1.00
^ To change the amount of liquid
detergent dispensed, press "Display"
ß as many times as necessary to
achieve the desired result (see chart
below):
Setting
.10
.20
.30
.40
.50
.60
.70
.80
.90
1.0
* Recommended dosage for neodisher
Dosing
Powdered detergent
from cup
Liquid detergent from
DOS-Module G60
Dosage
20 ml
30 ml
40 ml
50 ml*
60 ml
70 ml
80 ml
90 ml
100 ml
110 ml
TM
FA
37