Miele G 7881 Operating Instructions Manual page 42

Programming special functions
1.1.2 Priming the dispensing system
a) After setting the detergent dosage:
^ Turn the program selector to the
1 o'clock position. "do1" appears in
the display.
^ Press "Display" ß.
The dispensing system will be
primed automatically. "do1" will
appear in the display when priming is
finished.
^ Press the "Start" 6 button. "SP"
appears in the display.
^ Press "Start" 6 again. The change
has been recorded.
38
b) If only priming is required (e.g. the
dispensing system has been allowed to
become empty by mistake):
^ Select programming level 2
(see 1.).
Proceed as follows:
^ Turn the program selector to the
1 o'clock position. "do1" appears in
the display.
^ Press "Display" ß.
The dispensing system will be
primed automatically. "do1" will
appear in the display when priming is
finished.
^ Turn the machine off with the "On/Off"
button.
Every time the dispensing system has
been primed:
^ Run the "Rinse" program to dilute and
drain away any agents that may
remain in the wash cabinet.