Important Safety Instructions - Miele G 7881 Operating Instructions Manual

IMPORTANT SAFETY INSTRUCTIONS

This machine complies with all
relevant legal safety requirements.
Incorrect use however, can lead to
personal injury and damage to
property.
Read the operating instructions
carefully before starting to use this
machine. This way you will avoid the
risk of accidents and damage to the
machine.
Keep these instructions in a safe
place for reference, and pass them
on to any future user.
Correct use
This machine is designed for
commercial use and for
specialized applications only, as
described in these Operating
Instructions. Alterations to the machine
or using it for purposes other than those
for which it was designed would be
unauthorized and could cause harm.
Only clean and/or disinfect instruments
and utensils (dental) in this machine if
the manufacturer has stated that they
are suitable for machine processing.
Follow the instrument manufacturer's
instructions. The manufacturer cannot
be held liable for damage caused by
improper or incorrect use of the
machine.
4
Please pay attention to the following
notes, to maintain safe procedures.
The machine should only be
installed by a qualified and
competent contractor. Before
connecting the machine, the installer
should check that the voltage and
frequency of the electrical supply
correspond with the details on the data
plate of the machine.
Do not install the machine in an
area where a danger of explosion
or of freezing conditions may be
present.
The electrical safety of this
machine can only be guaranteed if
connected to an electrical system that
complies with all local and national
regulations. It should be checked by an
expert if necessary. The manufacturer
cannot be held responsible for damage
caused by incorrect wiring.
A damaged machine could be
dangerous. Turn off at the main
power immediately and call the Miele
Service Department or an authorized
and trained Miele Service Dealer.