Miele G 7881 Operating Instructions Manual page 34

G 7881
In critical applications where very
stringent requirements have to be
met, it is strongly recommended that all
the relevant factors for the process,
such as cleaning agent, quality of water
etc. are discussed with the Miele
Technical Application specialists.
If the cleaning result is subject to
particularly stringent requirements,
a regular quality control test should be
carried out by the user to ensure that
required standards of cleanliness are
being achieved.
The mobile units and special
inserts should only be used for
their specific application.
Empty any containers or utensils
before arranging them in the
machine.
Do not allow any remains of acids
or solvents, and in particular
hydrochloric acid or chloride solutions
to get into the wash cabinet. Similarly
avoid any materials with a corrosive
effect. The presence in compounds of
any solvents should be minimal,
(especially those in hazard class A1).
Ensure that solutions or steam
containing hydrochloric acid do not
come into contact with the steel outer
casing of the machine, to avoid any
corrosion damage.
Please follow the advice on
installation in these instructions
and the separate "Installation
Instructions".
IMPORTANT SAFETY INSTRUCTIONS
Using accessories
Only use genuine Miele
accessories with this machine.
Consult Miele on the type and
application of such equipment.
Disposal of your old machine
Before disposing of your old
machine, first make it unusable.
Disconnect, cut off the cable and any
plug from the cable.
For environmental and safety reasons,
ensure the machine is completely
drained of any residual water and
cleaning agent. (Observe safety
regulations and wear safety goggles
and gloves).
Make the door lock inoperative, so that
children cannot accidentally shut
themselves in. Then make appropriate
arrangements for the safe disposal of
the machine.
The manufacturer cannot be held
liable for damage caused by
non-compliance with these Warning
and Safety instructions.