Battery Change - inelo TachoReader Combo Plus Manual
Hide thumbs
Also See for TachoReader Combo Plus:
Table of Contents
Advertisement
TachoReader Combo Plus
Cause
No response from the tachograph.
Solution
Repeat reading from tachograph.
Cause
Incorrect data in the configuration file or other unrecognized error.
Cause
TR Combo Plus
1. Connect the
2. Open the configuration window.
3. Click on
4. Click:
2.11. Battery change
If
indicates (see
TR Combo Plus
critical charge of the battery / rechargeable batteries, replace the batteries with new ones.
To replace the batteries proceed as follows:
take off the blue protection skin;
·
press the spot on the back of the case as shown by the arrow (Fig. bellow) and remove the
·
cover. There you will find two batteries AA 1,5V;
take out old batteries and put new ones in.
·
to the computer.
(see "Configuration" topic for more).
.
>
"Error codes
-
Download from driver card
21
" topic for more) a low or
21
27
Advertisement
Table of Contents
Need help?
Do you have a question about the TachoReader Combo Plus and is the answer not in the manual?
Questions and answers
da para os novos parelhos ou tacografo da nova geracao
Yes, the inelo TachoReader Combo Plus can be made compatible with new generation tachographs (G2V2) by activating the smart tachograph readout function. Activation is done through the configurator software, and a code is required. Devices under warranty can be activated free of charge, while activation for devices out of warranty is chargeable.
This answer is automatically generated