Tacho Usb Transmission Cable; Installation - inelo TachoReader Combo Plus Manual
Hide thumbs
Also See for TachoReader Combo Plus:
Table of Contents
Advertisement
TachoReader Basic
4. Tacho USB Transmission cable
Plug the transmission cable ("Tacho USB") into USB port for direct data download from
tachograph into the TachoScan software on the laptop.
The advantage of this solution is the low cost of the device itself (when the user owns already
a laptop and TachoScan).
laptop needs external power supply.
4.1. Installation
Requirements for the installation in a PC
USB Transmission cable ("Tacho SUB"),
·
PC,
·
installed software TachoScan,
Ř
free USB port
Ř
Installation procedure
1.
Plug the transmission cable into the USB port of the PC.
2.
The following window pops up (Fig. bellow). Choose the option
specific location
Y
ou will have to take into account, that the whole set is bulky and the
Fig. Transmission cable "Tacho USB".
(pos.1) and press the button
Install from a list or
[Next >]
(pos.2).
45
Advertisement
Table of Contents
Need help?
Do you have a question about the TachoReader Combo Plus and is the answer not in the manual?
Questions and answers
da para os novos parelhos ou tacografo da nova geracao
Yes, the inelo TachoReader Combo Plus can be made compatible with new generation tachographs (G2V2) by activating the smart tachograph readout function. Activation is done through the configurator software, and a code is required. Devices under warranty can be activated free of charge, while activation for devices out of warranty is chargeable.
This answer is automatically generated