Table of Contents
Advertisement
TachoReader Basic
Five red LED blinks
Cause
No driver card in the tachograph..
Solution
1.
Insert the driver card into any slot of the tachograph or in the device configuration
window do not check the
"Configuration
2.
Repeat reading from tachograph.
Six red LED blinks
Cause
No response from the tachograph.
Solution
Repeat reading from tachograph.
Seven red LED blinks
Cause
Incorrect data in the configuration file or other unrecognized error.
Solution
TachoReader Basic
1.
Connect
2.
In the device configuration window click on
" topic for more),
3.
Repeat reading from tachograph.
The LED is off
Cause
No power.
Driver card download via tachograph
" topic for more).
31
to the computer.
.
option (see:
(see:
"Configuration
31
43
Advertisement
Table of Contents
Need help?
Do you have a question about the TachoReader Combo Plus and is the answer not in the manual?
Questions and answers
da para os novos parelhos ou tacografo da nova geracao
Yes, the inelo TachoReader Combo Plus can be made compatible with new generation tachographs (G2V2) by activating the smart tachograph readout function. Activation is done through the configurator software, and a code is required. Devices under warranty can be activated free of charge, while activation for devices out of warranty is chargeable.
This answer is automatically generated