Configuration Directly In The Device - inelo TachoReader Combo Plus Manual

Configuration
Plus -> Download from driver card inserted in the tachograph
Setting range of days does not affect the reading from the driver card - the device will always retrieve
all the data from the driver card.
m.Custom cofiguration - check it to make the configuration directly in the device (for a
detailed description, refer to the topic:
k.
n.
of the device.

6.1. Configuration directly in the device

To perform configuration directly in the device:
1. Connect the device to a computer - select: Custom configuration option in the
" window.
7
2. Connect TachoReader Combo Plus to the tachograph using a Tacho-Combo cable.
1. Setting the range of days to download:
below the progress bar there are numbers indicating the range of days to download
(e.g., 7 - the last seven days, 60 - the last sixty days, etc.);
to change the range of days to download, press the:
respective number of days lights up;
downloading is started by pressing:
2. Downloading data from driver card inserted in the tachograph - refer to the description
in the section: "Download from driver card inserted in the tachograph
"Configuration directly in the device
- use this button to save the new configuration settings,
- Use this function to delete all the download files from the memory
ul. Karpacka 24/U2b, 43-300 Bielsko-Biała • REGON 356687662 • NIP:551-23-33-463
tel. + 48 33 496 58 71, fax. +48 33 496 58 71 (111) • e-mail: biuro@inelo.pl • www.inelo.pl
13
button until the LED on the
button.
INELO Stocerz Sp. J.
);
");
9
"device configuration
".
13
9