Tachoreader Basic - inelo TachoReader Combo Plus Manual

TachoReader Combo Plus
After connecting TachoReader Combo Plus to computer LEDs on the progress bar do
not blink and the device is not detected in the system.
Restart the computer.
If the above step does not help, to check the very device, connect it to another computer.
If the device is still not visible in the system, connect the device to the computer using a
different MINI USB cable.
If the problem persists, contact the manufacturer
After connecting the TachoReader Combo Plus to the tachograph LEDs on the device do
not blink and data from tachograph are not downloaded
Switch the tachograph off and on, unplug and re-connect the device to the tachograph.
If the problem persists, check the device on another tachograph.
If the problem persists, contact the manufacturer
TR Combo Plus cannot read the driver/workshop card
Make sure that you insert the driver card reader correctly into the slot.
Check if the driver card is read by another digital card reader.
If the problem persists, contact the manufacturer

3. TachoReader Basic

TachoReader Basic
The
connecting other devices. Using the tachograph, it is also possible to download driver card data.
The device can store data in its internal memory until it is transferred to another media (for
example, to a computer disk).
TachoReader Basic
q
source is re uired. It is small, easy and convenient to use.
device allows you to download data directly from the tachograph without
uses tachograph power supply while retrieving data, so no external power
'
s service .
53
'
s service .
53
'
s service .
53
29