Touchscreen Menus And Commands - Agilent Technologies PlateLoc Quick Manual

Touchscreen menus and commands

Navigation pane
G5585B PlateLocThermal Microplate Sealer Quick Guide
To stop a seal cycle in an emergency:
If the Stop button on the touchscreen is not responding fast enough, turn off the
PlateLoc Sealer (1). The on/off switch is on the back of the device. Alternatively, you
can disconnect the power to the PlateLoc Sealer (2).
00191 00191
PlateLoc PlateLoc
connections connections
Lab automation system procedure
For instructions on how to stop a seal cycle from the VWorks software, see the
Automation Control User
Icon Description
Displays the Home page.
Displays the Settings pages, which enable you to adjust sealing
parameters and view information about the device.
Guide.
Touchscreen menus and commands
1
2
VWorks
19