Product Introduction - Wiznet WizFi630S User Manual

1. Product introduction

WizFi630S is RS-232 protocol and TCP /IP protocol IEEE802.11 b / g / n protocol to convert a wireless
command gateway module, the serial interface RS- 232 was the installation of equipment connected
to lan or WLAN network, remote sensing the management and the possible meaning to the product.
moreover, the Embedded switch in function of the public, is to practice.
serial (UART), lan, WiFi (WLAN) composed of serial interface in use (UART) - to - WiFi, serial - to -
Ethernet, Ethernet - to - WiFi can perform other functions. in the WizFi630S on the web server to
connect to the serial command, or even the use of easily available, the equipment is not serial, 8 / 16 /
32 bit micro controller is UART through simple configuration WiFi can.
the use of WizFi630S wireless module design and test, and the authentication process can be
decreased to. therefore, the wireless network does not have the experience or limited to the customer
the best solution is likely to be. WizFi630S is 802.11b / g / n standard for wireless interface. at the rate
of 150 Mbps to support.
WizFi630S is a convenient test platform and easy testing of the pc software and document, which is
easy to provide mobile solution development environment can provide.
4
© Copyright 2019 WIZnet Co., Ltd. All rights reserved.