General ML-3DG Instruction Manual page 10

Using the Multi-purpose Mount (continued)
FIGURE 10
FIGURE 11
FIGURE 12
10
Mounting via the clamp
Attach the two mount pieces together
•
via the magnetic backing (Fig.10).
Attach the instrument to the mount
•
using the thumb screw.
Use the clamp to mount to a suspended
•
ceiling track, ensuring that the mount has
a strong hold before releasing your hands.
To adjust the height of the instrument,
•
unlock the height adjustment knob. Rotate
the height adjustment knob to raise or lower
the instrument to the desired height. Retighten
the height adjustment lock knob to secure in
place. Alternatively, slide the mount on the
magnetic backing.
To rotate the instrument on the mount, loosen
•
the mini thumb screw, position the instrument,
and then re-tighten the thumb screw.
Mounting via screw fixing points - Method 1
Using the single magnetic mount piece
•
(Fig.11), attach the instrument to the
mount using the thumb screw.
Fix a screw into a secure surface and hook the
•
mount over the screw. Ensuring that the mount
has a strong hold before releasing your hands.
To adjust the height of the instrument, unlock
•
the height adjustment knob. Rotate the
height adjustment knob to raise or lower the
instrument to the desired height. Retighten the
height adjustment lock knob to secure in place.
To rotate the instrument on the mount, loosen
•
the mini thumb screw, position the instrument,
and then re-tighten the thumb screw.
Mounting via screw fixing points - Method 2
Attach the two mount pieces together with
•
the screw hole at the top (Fig.12) and follow
the instructions for method 1.
This method allows the magnetic piece
•
to slide up and down for added height
adjustment flexibility.