Conversion Procedure - Fujitsu PRIMERGY PG-R1CK2 User Manual

Conversion procedure

The following is the procedure to convert the server from a deskside model to a rackmount
model:
When installing or removing hardware options from the server,
turn off the server, all peripheral devices, the server monitor
module, and any other connected devices. Also unplug all
power cords. Failure to do so can lead to electric shock.
•
Contact your maintenance engineer to perform the conver-
sion.
•
For safety reasons, make sure the server is located on a sta-
ble/level surface when perform the conversion work as the
combined weight can be in excess of 35kg.
•
Also, work in an open space as the rackmount must be laid
horizontally to perform the conversion.
•
Make sure that the system is operating properly before per-
forming the conversion.
•
Devices inside the server remain hot after shutdown. Wait for
approximately 10 min. after shutdown before installing or
removing hardware options from the server.
•
Static electricity can damage the internal hardware compo-
nents. Always wear a wrist grounding strap when working
inside the server.
•
Do not touch any panel circuitry. Hold the metallic areas or
the green areas of the circuit boards.
E
3