Advertisement
To Play A Cassette Tape
Turn the radio on.
Insert the cassette through the tape door. (The "TAPE" indicator in
If you hear nothing or hear just a garbled sound, the cassette may not be
in squarely. Push the STOP- EJCT button to remove the tape and start
over. The tape equalization is automatically sensed and set. Insertin the
cassette also automatically disables DNR@* and activates DOLBY
8
noise reduction.
DNR' is the Dynamic Noise Reduction. It helps remove background hiss
noise from the radio.
the display will light.)
*DNR@ is a registered trademark of National Semiconductor Corporation.
Once the tape is playing, use the upper and lower knobs to adjust the
volume and balance, just as you do for the radio. Push the upper knob
to change tape direction. The arrow in the display shows which
direction the tape is being played.
Forward
and Reverse
4
To rapidly advance the tape. press
and the tape will rapidly go forward
until you press the STOP-EJCT button.
To rapidly reverse the tape. press
4
and the tape will rapidly reverse
until you press the STOP-EJCT button.
SEARCH
When
you
are playing a tape, the search feature lets you advance ahead
to the start of the next selection or rewind to the beginning of the
selection being played. Pressing the or
4
buttons will then advance or
rewind to the beginning or end of the selection being played.
NOTICE:
-
There must be at least a five second pause between selections on
the tape for the SEARCH feature to operate properly.
-
162
Advertisement
