Advertisement
-
The Lower Knob
Turn the lower knob to choose radio stations. Push the knob to switch
from AM or FM.
Behind the lower knob is the Fade control. It fades the sound between
the front and rear speakers.
SCAN
When
you
press the SCAN button, the SCAN indicator in the display will
light and the radio will find the next station and stay there about 5
seconds. Then it will go to the next station and pause, and keep doing
that until you push either the SCAN or upper knob.
SEEK
This button selects stations, but it doesn't keep moving as SCAN does.
When you push SEEK the radio will automatically go to the next
strongest station and stay there.
AM-ST (AM Stereo)
Pressing the AM-ST button enables the AM stereo reproduction of an
AM station that is broadcasting in stereo. Switching to stereo on weaker
non AM stereo stations improves fidelity, but may increase noise due to
interference from power lines, neon signs, atmosphere conditions, and
unwanted stations. The STEREO indicator light only comes on when the
radio is tuned to a clear, noise free station broadcasting C-QUAM@ AM
stereo.
Pushbuttons
You can set the pushbuttons to get up to 14 favorite stations (seven on
FM and seven more on AM). Just:
Choose either AM or FM.
Tune in the station.
Push the SET button.
Within 5 seconds, push one of the four pushbuttons.
Repeat these steps for each of the 5 pushbuttons.
, -
L
Advertisement
